| Sign In | Join Free | My autochinanet.com | 
              
  | 
      
Brand Name : Microchip
Model Number : PIC18F2620-I/SO
Certification : ROHS
Place of Origin : CHIAN
MOQ : 10PCS
Price : NEGOTIABLE
Payment Terms : T/T, Western Union
Supply Ability : 43200PCS/WEEK
Delivery Time : 2-3DAYS
Packaging Details : 1080PCS/BOX
Product Category : 8-bit Microcontrollers - MCU
Core : PIC18
Program Memory Size : 64 kB
Data Bus Width : 8 bit
ADC Resolution : 10 bit
Maximum Clock Frequency : 40 MHz
Number of I/Os : 25 I/O
Data RAM Size : 3.87 kB
Supply Voltage - Min : 4.2 V
Supply Voltage - Max : 5.5 V
Minimum Operating Temperature : - 40 C
Maximum Operating Temperature : + 85 C
Data RAM Type : RAM
Data ROM Type : Flash
Height : 2.31 mm
Length : 17.87 mm
Width : 7.49 mm
Interface Type : EUSART, I2C, SPI
Moisture Sensitive : Yes
Number of ADC Channels : 10 Channel
Number of Timers/Counters : 1 Timer
Processor Series : PIC18
Factory Packing Quantity : 1080
PIC18F2620-I/SO Microchip 8-bit Microcontrollers - MCU Enhanced Flash Microcontrollerswith 10-Bit A/D and nanoWatt Technology
1.Power Management Features:
  • Run: CPU on, Peripherals on
  • Idle: CPU off, Peripherals on
  • Sleep: CPU off, Peripherals off
  • Ultra Low 50nA Input Leakage
  • Run mode Currents Down to 11 μA Typical
  • Idle mode Currents Down to 2.5μA Typical
  • Sleep mode Current Down to 100 nA Typical
  • Timer1 Oscillator: 900 nA, 32 kHz, 2V
  • Watchdog Timer: 1.4μA, 2V Typical
  • Two-Speed Oscillator Start-up
2.Flexible Oscillator Structure:
  • Four Crystal modes, up to 40 MHz
  • 4x Phase Lock Loop (PLL) – Available for Crystal and Internal Oscillators
  • Two External RC modes, up to 4 MHz
  • Two External Clock modes, up to 40 MHz
  • Internal Oscillator Block:
  - Fast wake from Sleep and Idle, 1 μs typical
  - 8 use-selectable frequencies, from 31 kHz to 8MHz
  - Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
  - User-tunable to compensate for frequency drift
  • Secondary Oscillator using Timer1 @ 32 kHz
  • Fail-Safe Clock Monitor:
  - Allows for safe shutdown if peripheral clock stops
3.Peripheral Highlights:
  • High-Current Sink/Source 25 mA/25 mA
  • Three Programmable External Interrupts
  • Four Input Change Interrupts
  • Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
  • Enhanced Capture/Compare/PWM (ECCP) module (40/44-pin devices only):
  - One, two or four PWM outputs
  - Selectable polarity
  - Programmable dead time
  - Auto-shutdown and auto-restart
4.Peripheral Highlights (Continued):
  • Master Synchronous Serial Port (MSSP) module Supporting 3
  -Wire SPI (all 4 modes) and I2C™ Master and Slave modes
  • Enhanced Addressable USART module:
  - Supports RS-485, RS-232 and LIN/J2602
  - RS-232 operation using internal oscillator block (no external crystal required)
  - Auto-wake-up on Start bit
  - Auto-Baud Detect
  • 10-Bit, up to 13
  -Channel Analog-to-Digital (A/D)Converter module:
  - Auto-acquisition capability
  - Conversion available during Sleep
  • Dual Analog Comparators with Input Multiplexing
  • Programmable 16-Level High/Low-Voltage Detection (HLVD) module:
  - Supports interrupt on High/Low-Voltage Detection
5.Special Microcontroller Features:
  • C Compiler Optimized Architecture:
  - Optional extended instruction set designed to optimize re-entrant code
  • 100,000 Erase/Write Cycle Enhanced Flash Program Memory Typical
  • 1,000,000 Erase/Write Cycle Data EEPROM Memory Typical
  • Flash/Data EEPROM Retention: 100 Years Typical
  • Self-Programmable under Software Control
  • Priority Levels for Interrupts
  • 8 x 8 Single-Cycle Hardware Multiplier
  • Extended Watchdog Timer (WDT):
  - Programmable period from 4 ms to 131s
  • Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via Two Pins
  • In-Circuit Debug (ICD) via Two Pins
  • Wide Operating Voltage Range: 2.0V to 5.5V
  • Programmable Brown-out Reset (BOR) with Software Enable Option
6.
| 
                                             | 
                
                        PIC18F2620-I/SO Microchip 8-bit Microcontroller - Enhanced Flash Microcontroller with 10-bit MCU Images |